Product search:

High%20Precision%20Ultrasonic%20Thickness%20Gauge%20-%20DW-3

Home
Product
Service
Distributor
About Us
Contact

Welcome to
Digiwork
Get better
Instruments

Thickness TestersThickness PartsHardness TestersHardness PartsFlaw DetectorsRoughness TestersRoughness PartsDigital Multimeters

Call 905-669-1663

 

Home > Products > Thickness Tester >

High Precision Ultrasonic Thickness Gauge - DW-300

Unit Price: US $1499.00

DW-300 is for high precision, high resolution and ultra fine thickness measurements. It uses the most advanced microprocessor and ultrasonic technology to offer users many outstanding features. It presents highly stable and repeatable reading, high accuracy and resolution (up to 0.001 mm or 0.0001 inch) and ability for measuring ultra thin sample (as low as 0.15mm or 0.006 inch). It also offers a compact, comfortable and durable structure for hand-holding, simple to use through the menu, multiple language selection, low power consumption (with two normal or rechargeable AA batteries). These features along with its high quality probe make DW-300 unequalled in its performance as well as its value!

DW-300 is manufactured under the strict quality control guidelines established by ISO 9001: 2000 Standards. Its quality is insured by our return policy and full-coverage warranty.

Technical Data:

  • Measuring Range (for Steels):

    • Interface-Echo Mode: (I-E or Standard Mode)

      • 0.50 mm - 25.4 mm (0.019 in - 1.000 in).
    • Echo-Echo Mode: (E-E or High Precision mode)

      • 0.15 mm - 10.0 mm (0.006 in - 0.394 in).
  • Measuring Accuracy:

    • +/- 0.005mm or 0.0002 inch (if thickness < 3mm)
    • +/- 0.02mm or 0.001 inch (if thickness < 20mm)
  • Display Resolution:

    • mm: 0.1, 0.01 or 001
    • inch: 0.01, 0.001, or 0.0001
  • Display Units: Imperial and Metric
  • Sound Velocity Range: 1000 to 9999 m/sec (0.0394 - 0.3936 inch/ms)
  • Measuring Refresh Frequency: 4Hz in normal mode, up to 25Hz
  • Memory capacity: Store up to 500 test values
  • Display LCD: 42 X 57 mm LCD size with EI backlight and adjustable contrast, font size up to 13.75 mm (0.54 inch).
  • Multiple Calibrations: One Point or Two Points.
  • Probe contact indicator
  • Low battery indicator
  • Power Source: Two Normal 1.5V AA Batteries
  • Battery Life: Up to 200 hours
  • Power off: Auto power off if idle for 4 minutes
  • Operating Temperature: -10 C to +50 C (may go as low as -20 C with pre-request)
  • Unit Size: 2.9 W x 5.9 H x 1.26 D inches (73 W x 149 H x 32 D mm)
  • Weight: 200g

Applications:

  • Metal Materials: Al, Fe, Steels, Cu, Brass, Zn, Ag, Au, Sn,....
  • Acrylic Resin, Water Glass, ...
  • Other materials with known sound velocity values.

Contents in the package:

  1. Main Unit with Calibration Block (4.00 mm)
  2. Precision Probe with Cable and Replaceable Delay Tip
  3. Bottle for Engine Oil (Coupling Paste) - Will be filled with oil ONLY IF required - to avoid leaking during transportation
  4. Operation Manual in English
  5. Consumer-Type 2 AA Type Alkaline Battery (3 Volt)
  6. Foam-Fitted Carrying Case

Warranty:

Gauge: 1 Year (add $99.00 for an extended warranty or up to 2-year)

Probe: 180 Days

Picture


© 2016 Digiwork Instruments, All Rights Reserved.