Portable%20Hardness%20Tester%20HLM-100%20Plus

Call 905-669-1663

Home > Products > Hardness Tester >

Portable Hardness Tester with Mini Printer - HLM-100 Plus

Unit Price: US $1599.00

HLM-100 Plus - Fully Equipped Digital Leeb's Hardness Tester

HLM-100 plus hand-held digital hardness tester features high measuring accuracy, reliability and durability, wide measurable hardness ranges, ease of operation, and portability (light weight and small dimensions). HLM-100 plus comes with a powerful built-in microprocessor, a convenient mini-printer, and a RS-232C communication port (all are standard features). This hardness tester has been widely used in a long array of industrial sectors.

• Convenient hardness measurements at difficult-to-access locations or in confined spaces such as the inner wall surface of a die or mould;
• Determination of hardness variations over a large surface area;
• Hardness testing on heavy and large work pieces or on permanently installed parts or machines whose hardness cannot be measured by using a traditional hardness tester;
• In-line hardness measurements essentially in real time during the manufacturing process.

Automatic conversion between different hardness scales:

Correlations between HL values and other standard hardness Values (Brinell, Vickers, Rockwell and Shore) have been established for 9 most commonly used materials. Conversions between different scales can be readily accomplished.

Measurements can be made from several different directions:

This feature makes it convenient to conduct hardness measurements on a large part or within a confined space.

The measuring accuracy may be compromised if erroneous data with an abnormally large deviation are accepted.

The instrument provides a manual error-correcting deleting function during batch test situations.

High batch testing efficiency:

For a batch test that involves testing a large number of similar parts, the expected range of hardness values can be pre-set based on different requirements for improved testing efficiency. Upper or lower hardness limits can be pre-set for material sorting.

Data printing functions:

Data acquired may be printed out immediately or stored and printed at a later time.

RS-232C Communication port:

Transfer data to a PC for further data reduction and processing.

Automatic power-off:

When the tester remains idle for 4 minutes (no measurement made and no key-pad pressing operation) or when battery power is below a critical level, tester power will be automatically switched off.

Auto Re-set:

During power-up and power-down, the tester is capable of automatic re-setting.

LCD backlit by advance Electro-Luminescence (EL) technology:

Liquid crystal display with back-illuminating capability.

Intelligent battery recharge management.

Pre-Loaded Material Codes:

Steel, Cast steel, Alloy Tool Steel, Grey Cast Iron, Nodular Cast Iron, Aluminium Alloys, Brass, Bronze, Copper alloys

Strength testing Conversion for steel and cast steel.

Technical Specifications:

• Measuring Accuracy: relative error +/-0.8% (750-800L_D)
• Measuring ranges:
  • L_D 200 -900
  • HB 30 -655
  • HRC 20- 68
  • HRB 20- 101.
  • HV 80 -940
  • HSD 32.5- 99.5

• Equivalent tensile strength σb 500-1923N/mm2 (for reference only)

• Working temperature: 0 C ~ 45C

• Relative humidity < 90% RH

• Power: 4 Ni-MH batteries (1.2 Volts x 4).

• Battery re-charge time: approximately 3 hours

• Automatic power-off: when idle for 4 minutes

• RS-232C communication port: transfers data to a PC for further processing (e.g., for SPC), display and printing.

• Mini-printer: may print out data immediately after measurement or at a later time.

• Print paper: Ф30mm x 44mm

• Dimensions: 224mm x 84mm x 38mm

• Tester weight: 0.7kg (excluding the impact probe)

Standard Delivery:

Picture